Factory Reset (Spark 40)¶

This process will reset all four presets stored on the hardware as well as Bluetooth pairing information.

Always inform the customer to back up the presets before performing a factory reset!

1. Turn the device off.

2. Press and hold the “TAP” button when turning on Spark amp, release the TAP button when it starts to blink.

3. Long-press the blinking "TAP" button until all four (1~4) LEDs blink once, then release the TAP button.
   The TAP button needs to be released as soon as all four LEDs start to blink.
   __Short press the TAP button to abort factory reset.

4. If "TAP" button is blinking and CH1 LED is on, the factory reset process is completed.

Forget device in Bluetooth settings before connecting again after factory reset.